Table of Contents
Advertisement
16. Heads
Nothing is to be put down the head unless it has been digested first.
Select Fresh Water or Saltwater using the top switch
•
Before using it, ensure that there is enough water in the bowl.
•
If the bowl is empty, hold switch on number 1 or ADD WATER position
•
until the flushing pump is primed, and water enters the bowl.
•
During use, pump as necessary to keep the contents of the bowl low
•
enough for comfort using the number 2 side of the switch PUMP OUT.
•
After use, press the number 2 side of the Switch PUMP OUT for a few
•
seconds (Hold for as long as possible so the waste travels all the way
•
through the lines.
•
ADD WATER and PUMP OUT until water in the bowl is clear.
•
Hold the PUMP OUT side of the Flush Control Switch until the bowl is empty.
Always leave the bowl empty to minimize odor and spillage.
Blocked heads due to any other blockage other than mechanical failure of
parts is at the charterer's expense as per your charter contract. This
includes the chase boat and technician's fee.
Advertisement
Table of Contents
