Before servicing the computer
Carefully read this topic before servicing the computer.
Disabling the built-in battery
Before replacing any FRU, ensure that you have disabled the built-in battery by doing the following:
1. Turn off your computer and disconnect the ac power adapter and all cables from the computer.
2. Turn on your computer. When the ThinkPad logo is displayed, immediately press F1 to enter ThinkPad
Setup.
3. Select Config ➙ Power. The Power submenu is displayed.
4. Select Disable built-in battery and press Enter.
5. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off
automatically. Wait three to five minutes to let the computer cool.
Removing the micro-SIM-card tray and the micro SIM card
Remove the micro-SIM-card tray before you start the servicing. If the computer has a micro SIM card
installed, you also must remove the micro SIM card .
After you finish the servicing, ensure that you install the micro SIM card (if available) and the micro-SIM-card
tray back into the computer.
Removing a major FRU
This section provides instructions on how to remove a major FRU.
54
ThinkPad X1 Carbon Hardware Maintenance Manual
1