CDA vc800 Installation, Use And Maintenance Manual page 24

Changing the Quantity of Hot Water
The machine is set by default to automatically deliver 200ml of hot
water.
To change these quantities, proceed as follows:
Place a container underneath the cappuccino nozzle (fig. 5).
Press the Settings Menu button (B2) to enter the menu (fig. 16) then
press the "+" & "-" buttons (B7) and (B8) (fig. 2) until "PROGRAM HOT
WATER" is displayed.
Press the "ok" button (B9) to confirm.
Select the required quantity of water by pressing the "+" & "-" buttons
(B7) and (B8). The progress bar shows the quantity of water selected.
Press the "ok" button (B9) to confirm (or the button (B6) to cancel
the operation).
Press the button (B6) (fig. 17) twice to exit the menu.
The appliance is now reprogrammed with the new settings and is
ready.
24