Turning On And Heating Up - CDA vc800 Installation, Use And Maintenance Manual

Adjust the water hardness setting as soon as possible after
installation, see instructions in the "Setting Water Hardness" section
(page 35).

Turning On and Heating Up

Each time the appliance is turned on, it performs an automatic preheat
and rinse cycle which cannot be interrupted. The appliance is ready
for use only after completion of this cycle.
Danger of Scalding: During rinsing, a little hot water flows from the
coffee spouts.
To turn the appliance on, press the ON/OFF/Stand-By button (A7) (fig.
1), the message "HEATING UP... PLEASE WAIT" is displayed.
When heating is complete, the message changes to "RINSING" and
hot water is rinsed through the coffee spouts.
The message "MEDIUM CUP NORMAL TASTE" is displayed when the
coffee machine has reached normal operating temperature.
If no button is pressed within approx. 2 minutes, the time is displayed,
if set (see the "Setting The Clock" section). If the time has not been
set, the appliance displays the last functions set.
When any button is pressed, "MEDIUM CUP NORMAL TASTE" is
displayed and the appliance is ready to make coffee again.
14