Table of Contents
Advertisement
SLink Read Response OK [Disabled]
This value specifies whether SLINK read response errors are converted to an Okay
response. When this value is set to TRUE, read response errors are converted to Okay
responses with data of all FFs. When set to FALSE, read response errors are not
converted.
Configuration options: [Disabled] [Enabled]
SLink Read Response Error Handling [Log Errors in MCA]
This value specifies whether SLINK write response errors are converted to an Okay
response. When this value is set to 0, write response errors will be logged in the MCA.
When set to 1, write response errors will trigger an MCOMMIT error. When this value is
set to 2, write response errors are converted.
Configuration options: [Enabled] [Trigger MCOMMIT Error] [Log Errors in MCA]
Log Poison data from SLINK [Disabled]
This value specifies whether poison data propagated from SLINK will generate a
deferred error. When this value is set to TRUE, deferred errors are enabled. When set
to FALSE, errors are not generated.
Configuration options: [Disabled] [Enabled]
PCIe Aer Reporting Mechanism [Auto]
This value selects the method of reporting AER errors from PCI Express. A value of 0
indicates that the hardware will report the error through MCA. A value of 1 allows OS
First handling of the errors through generation of a system control interrupt (SCI). A
value of 2 allows Firmware First handling of the errors through generation of a system
control interrupt (SCI).
Configuration options: [Firmware First] [OS First] [MCA] [Auto]
Edge Control [Disabled]
Configuration options: [Disabled] [Enabled] [Auto]
NBIO Poison Consumption [Auto]
Configuration options: [Disabled] [Enabled] [Auto]
Sync Flood on PCIe Fatal Error [Auto]
Configuration options: [Auto] [True] [False]
Enable AER Cap [Auto]
This item allows you to enable or disable Advanced Error Reporting Capability.
Configuration options: [Enable] [Disabled] [Auto]
Early Link Speed [Auto]
This item allows you to set Early Link Speed.
Configuration options: [Auto] [Gen1] [Gen2]
Hot Plug Handling mode [Auto]
This item allows you to control the Hot Plug Handling mode.
Configuration options: [A0 Mode] [OS First (No Error Handling)] [OS First (Error Handling -
Not Implemented)] [Firmware First (Not Implemented)] [Auto]
ASUS RS720A-E9-RS24V2
5-45
Advertisement
Table of Contents
