Installation And Use - Beamz Light Package 3 Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

S500 Smokemachine

Warning:

The smokemachine must be placed at least 100 cm away from inflammable materials such as curtains, books, etc.

Make sure that the housing cannot be touched by accident.

For indoor use only.

During installation, nobody should stand beneath the mounting area.

Prior to the first use, have the unit checked by a qualified person.

The unit contains voltage carrying parts. DO NOT open the smokemachine

Never plug or unplug the unit with wet hands.

If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.

If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains outlet. It needs

to be repaired by a qualified technician.

Only connect this unit to an earthed mains outlet of 220-240Vac/50Hz .

Always unplug the unit during a thunderstorm or when it is not in use.

If the unit has not been used for a longer period of time, condensation can occur inside the housing. Please let the

unit reach room temperature prior to use.

When you unplug the unit from the mains always pull the plug, never the lead.

In order to prevent dropping of the unit, a safety fastening needs to be installed. This can be a solid chain, a steel

cable, etc. which has to be fastened separately from the mounting bracket.

The supplied bracket is the main fixing and must be used to solidly mount the light effect.

In order to avoid accidents in public premises, the local legal requirements and safety regulations/warnings must

be fulfilled.

Keep out of the reach of children.

Safety

Plug the smoke machine only in an earthed mains outlet or extension cord! ATTENTION: the powercord can only be

replaced by an original replacement, supplied by Tronios.

Be careful when filling the fluid tank. First of all, unplug the mains lead! Then unscrew the cap on the tank and fill

it by means of a funnel.

Only use the original Beamz smoke fluid which is environmental friendly and, if used correctly, leaves no residues.

Do not obstruct the openings on top of the case to guarantee a good ventilation. The heating element of the smoke machine

generates heat which needs to be removed. Don't put any objects on the smoke machine.