If You Need Further Assistance; Before You Contact Toshiba - Toshiba DX1210-ST4N22 User Manual

144
If Something Goes Wrong

If you need further assistance

5
6
USB Sleep and Charge is not working.
❖
Make sure that the device you want to charge is connected to a
port that supports the USB Sleep and Charge function. Ports
that support this feature are identified with the ( ) icon.
❖
USB Sleep and Charge may be disabled. Open the TOSHIBA
Sleep Utility to check if the feature is disabled and to enable it
if necessary. For more information, see
USB Sleep and Charge" on page
❖
Try selecting a different charging mode in the TOSHIBA Sleep
Utility, if your computer provides more than one charging
mode. For more information, see
settings" on page
❖
The USB Sleep and Charge function may not work with certain
external devices even if they are compliant with the USB
specification. In those cases, power on the computer to charge
the device or use a different charging device.
If you need further assistance
If you have followed the recommendations in this chapter and are
still having problems, you may need additional technical assistance.
This section contains the steps to take to ask for help.

Before you contact Toshiba

Since some problems may be related to the operating system or the
program you are using, it is important to investigate other sources
of assistance first.
Try the following before you contact Toshiba:
❖
Review the troubleshooting information in your operating
system documentation.
❖
If the problem occurs while you are running a program, consult
the program's documentation for troubleshooting suggestions.
Contact the software company's technical support group for
their assistance.
Use the new hardware or software for a while, noting any
new problems. Make sure that your critical applications
(email, business applications, etc.) are working correctly,
and verify that important devices are still functioning.
For each additional hardware or software item, repeat
these steps, starting at step 1 if any of your critical data has
changed, or starting at step 2 if no critical data has
changed.
118.
"Enabling/Disabling
118.
"Power supply mode