Table of Contents
Advertisement
en Cleaning and servicing
14.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press
and, at the same time,
2.
turn the programme selector to po-
sition 2.
The display shows the current
a
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 35
To change the value, press
4.
.
To save the changes, switch off
5.
the appliance.
Cleaning and servicing
15 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
15.1 Tips on cleaning and
care
Wipe down the
housing and the
controls with
36
/
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
nothing but water
and a damp
cloth.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Leave the appli-
ance door open
after use.
15.2 Base unit
The base unit is the accessible area
at the bottom of the appliance in
which you will find the heat ex-
changer.
Opening the base unit
Requirements
The appliance has cooled down
¡
for 30 minutes.
The appliance door is closed.
¡
Open the maintenance flap.
1.
If you place a cloth beneath the
maintenance flap, you can collect
the remaining water from the base
unit.
Fresh deposits
are easier to re-
move without
leaving any
residue.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.
Advertisement
Table of Contents
