Table of Contents
Advertisement
en Installation and connection
Water outlet connection types
ATTENTION!
In the event of a blocked or covered
outlet, accumulated wastewater can
flow back into the appliance.
Before operating the appliance, en-
▶
sure that the wastewater drains
away quickly and eliminate any
blockages.
Drainage into a
siphon.
Drainage into a
wash basin.
Drainage into a
gully.
16
Secure the con-
nection point with
a (12-22 mm)
hose clamp.
Secure the water
outlet hose with
a hose guide at
a height of at
least 80 cm and
no more than
100 cm.
Note: You can
use the Y-distrib-
utor → Page 27
to connect the
water drain hose
of an additional
appliance, such
as a washing
machine, to the
same siphon out-
let.
Push the water
drain hose fully
through the el-
bow → Page 13
and secure it us-
ing fixing mater-
ial.
Secure the elbow
at a height of no
more than 100
cm.
Push the water
drain hose fully
through the el-
bow → Page 13
4.5 Aligning the appliance
In order to reduce vibrations and
noises, align the appliance correctly.
To align the appliance, turn the ap-
▶
pliance feet. Check that the appli-
ance is level using a spirit level.
All appliance feet must stand firmly
on the ground.
4.6 Connecting the appliance
to the electricity supply
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
The connection details of the appli-
ance can be found under Tech-
nical data → Page 47.
Check the mains plug is inserted
2.
properly.
and secure it us-
ing fixing mater-
ial.
Secure the elbow
to the gully.
Advertisement
Table of Contents
