General - Sharp TU-T2HR32 Operation Manual

Basic adjustment

General

Settings
AV Settings
Languages
Parental Control
General
OK
Select Exit Exit Menu
General
Auto Standby
This function allows you to automatically switch the
Recorder into standby mode when there is no user
activity for 3 hours.
The Recorder will automatically switch
into standby mode when there is no
Enabled
user activity for 3 hours.
The Recorder will remain on constantly
unless switched into standby mode by
Disabled
the user.
General
Power Save in Standby Mode
This function allows you to control the power saving
features of your Recorder.
The Recorder uses a very low amount of
Enabled
power when in standby.
Power saving features are disabled.
Disabled
General
Upgrade Software
This function allows you to control when software
upgrades are installed.
The Recorder will automatically install
Automatic
software upgrades when available.
The Recorder will display a message
allowing you to confirm or cancel the
Manual
software upgrade.
24
TU-T2HR32_GB.indd 24 TU-T2HR32_GB.indd 24
Auto Standby Enabled
Power Save in Standby Mode
Upgrade Software
Auto Retune
Auto Retune Messages
Network Configuration
Manual Tune
First Time Installation
Item
Item
Item
General
Auto Retune
This function allows you to control when new services
(channels) are added and stored on the Recorder.
Item
Whenever new services (channels) are
detected, the Recorder will automatically
Always Start
tune and store them.
Whenever new services (channels) are
detected, a message will appear on
screen. You can choose to tune and
Always Ask
store the new services or cancel the
auto retune.
General
Auto Retune Messages
This function controls when retune messages are
displayed.
Item
All messages are displayed.
All
No Minor
Only major messages are displayed.
Messages
Only information messages are
Information Only
displayed.
No messages are displayed.
None
NOTE
During the digital switchover, Auto retune messages may be
•
displayed. Follow the on-screen instructions to retune.
General
Network Configuration
This function allows you to configure the network.
29/06/2010 15:16:40 29/06/2010 15:16:40