Download The Application - Beko VRR 84314 VB User Manual

5 Operation
Press " " button for 15 seconds in standby position to reset the system. When the system is reset, the
map and the original settings (including virtual limits) on the robot vacuum cleaner are deleted.
5.3.1 Operation with the application

Download the application

To download the application, search for "HomeDirect-SDA" application in the mobile app store. Review
the mobile application manual for detailed information.
Reset Wi-Fi
Press " " " " buttons simultaneously until you hear the aural warning and see the light blinking.
Add a device
• Open the app, create a new account and follow the instructions in the application.
• Before setting up the Wi-Fi, ensure that the robot vacuum cleaner and the Wi-Fi network meet the
following requirements.
A. Robot Vacuum Cleaner:
• The charging level of the robot vacuum cleaner shall be over 20% or the robot vacuum cleaner shall
be placed on the charging dock.
B. Wi-Fi network:
• Make sure the password of your wireless network (modem) is correct.
• Do not use any VPN (Virtual private Network).
• Wi-Fi router shall support, 802.11b/g/n and IPv4 protocols.
• The router shall be in the 2.4GHz frequency band or a dual-band router that supports the 2.4GHz band
shall be used. The robot vacuum cleaner does not support the 5GHz frequency band.
• If the robot vacuum cleaner cannot connect the 2.4/5GHz dual-band Wi-Fi network, please select
2.4GHz network for Wi-Fi settings. You may switch back to the other frequency band when the setting
is completed.
• If you are connecting to a hidden network, please ensure that you enter the network name [SSID (sen-
sitive to capitalization)] correctly and that you are connected to a
• If you are using a wireless network extender, please ensure that the network name (SSID) and the
password are the same with the main network.
16 / EN
2.4GHz wireless network.
Robot Vacuum / User Manual