Beko VRR 84314 VB User Manual page 14

5 Operation
C
Charging starts after the lighting indicator of charging station flashes 3 times and then it is
turned off completely.
5.3 Operation
For the first operation, bring the ON/OFF button on the side from "O" to "I" position. Press " " button
on the robot vacuum cleaner for 3 seconds to turn it on.
• Do not turn off the appliance using ON/OFF button directly during cleaning; otherwise the data of the
robot vacuum cleaner cannot be saved.
• If the ON/OFF button is on OFF position, the robot vacuum cleaner will be turned on automatically
when it is placed on the charging dock and turned off automatically when it is removed from the
charging dock.
• If the robot vacuum cleaner will not be used for a long period of time, bring the ON/OFF button to off
position.
Starting the cleaning
Press " " button to start the automatic cleaning mode. When it is started, the
robot vacuum cleaner is removed from the charging dock, performs an automatic
scan to create a map, determines the cleaning route in a smart way and divides the
area to several regions. The cleaning route is planned along the wall and the robot
vacuum cleaner moves forward and backward to clean different regions in order.
A
WARNING: If the charging level is too low, the cleaning cannot be started. Please charge
the appliance before starting the cleaning.
A
WARNING: Before the cleaning, tidy up all cables to prevent disconnections due to
entanglement/pulling of the cables and to prevent damage to the furniture.
A
WARNING: In the automatic cleaning mode, if the area to be cleaned is less than 10
square meters, the cleaning is performed twice as default.
A
WARNING: Do not move the charging dock during cleaning and make sure that the station
is plugged; otherwise the robot vacuum cleaner may not be able to return for recharging.
Pausing
Press " " button on the body to stop the robot vacuum cleaner while it is operating. The robot vacuum
cleaner switches to pause mode.
14 / EN
Robot Vacuum / User Manual