cut the LED power supply wires that exit under
the tank (left side operator)
Pull down the tube and remove it from the
blocks
remove the led cable from the tube
remove the top supporting screws on both sides
Long screw
over
Short screw
under
Caution: the screws have different lengths. then
each must be repositioned in the respective
position
You can now remove the glass top
disconnect the glass side power cable under
the worktop and repeat for the other side
unscrew all the blocks and keep them aside for
later
unscrew the side
from the supports,
making sure to
support it
you can now remove the
sides