Installing Software Drivers - Supero SUPER P3TDE6 User Manual

S
UPER P3TDE6/P3TDER User's Manual
2-9

Installing Software Drivers

After all the hardware has been installed you must install the software
drivers. The necessary drivers are all included on the Supermicro CD that
came packaged with your motherboard.
CDROM drive, the display shown in Figure 2-5 should appear. (If this dis-
play does not appear, click on the My Computer icon and then on the icon
representing your CDROM drive. Finally, double click on the S "Setup" icon.)
Figure 2-5.
Click the icons showing a hand writing on paper to view the readme files
for each item. The bottom icon with a CD on it allows you to view the
entire contents of the CD.
Build SCA disk (QLogic GEM 354): For integration with the SuperServer
SC850 and SC860 chassis.
Driver/Tool Installation Display Screen
2-22
After inserting this CD into your