Ipmb; Smb; Dip Switch Settings; Dip Switch 1: Processor Speed - Supero SUPER P3TDE6 User Manual

IPMB (P3TDER only)
An IPMB (Intelligent Platform Man-
agement Bus) connection is lo-
cated at JP70. Connect the appro-
priate cable here to utilize IPMI on
your system.
SMB (P3TDER only)
An SMB (System Management
Bus) connection is located at
JP71. Connect the appropriate
cable here to utilize SMB on your
system.
2-6

DIP Switch Settings

DIP Switch 1:
Processor Speed
The red "DIP" switch labeled SW1
has four individual switches,
which are used to set the speed
of the processor (CPU).
The table on the right shows the
switch settings for the various
speeds your processor may be
able to run at. The speeds on the
left are for 100 MHz and those on
the right are for 133 MHz front
side bus speeds.
Note: Most Intel processors have
a fixed speed that overwrites the
setting of DIP Switch
1.
2-13
Chapter 2: Installation
P ro c e s s o r S p e e d S e le c tio n
(D IP S w itc h 1 )
C P U S W S W S W
S peed #4 #3 #2
500/666 O N
550/733 O N
600/800 O N O N
650/866 O N O N
700/933 O N
750/1.0 O N
800/1.06 4 O N
850/1.13 O N O N
900/1.2 O N O N
950/1.26 O N O N O N
1.0/1.33 O N
1.05/1.4 O N O N
S W
#1
O N
O N
O N
O N
O N
O N