Pc Health Monitoring - Supero SUPER P3TDE6 User Manual

S
UPER P3TDE6/P3TDER User's Manual
1-4

PC Health Monitoring

This section describes the PC health monitoring features of the SUPER
P3TDE6/P3TDER. These motherboards have an onboard System Hardware
Monitor chip that supports PC health monitoring.
Onboard Voltage Monitors for the CPU Core, Chipset Voltage,
+5V and +12V
The onboard voltage monitor will scan these voltages continuously.
+3.3V level is also monitored. Once a voltage becomes unstable, a warning
is given or an error message is sent to the screen. Users can adjust the
voltage thresholds to define the sensitivity of the voltage monitor.
Fan Status Monitor with Firmware/Software On/Off Control
The PC health monitor can check the RPM status of the cooling fans. The
onboard 3-pin CPU and chassis fans are controlled by the power manage-
ment functions.
logic.
Environmental Temperature Control
The thermal control sensor monitors the CPU temperature in real time and
will turn on the thermal control fan whenever the CPU temperature exceeds
a user-defined threshold.
the CPU. It can continue to monitor for overheat conditions even when the
CPU is in sleep mode. Once it detects that the CPU temperature is too high,
it will automatically turn on the thermal control fan to prevent any overheat
damage to the CPU. The onboard chassis thermal circuitry can monitor the
overall system temperature and alert users when the chassis temperature
is too high.
CPU Fan Auto-Off in Sleep Mode
The CPU fan activates when the power is turned on. It can be turned off
when the CPU is in sleep mode. When in sleep mode, the CPU will not run
at full power, thereby generating less heat.
The thermal fan is controlled by the overheat detection
The overheat circuitry runs independently from
1-14
The