3idee hp-x Assembly Instructions

Vesa adapter

Download this manual

hp-x VESA adapter

Assembly

instructions

The VESA adapter is compatible with the following products from

(hp.com):

22ea, 22eb, 22er, 22es, 22f, 23ea, 23eb, 23es, 23f, 24ea, 24eb, 24er,

24es, 24f, 25F, 27f, 27fw

The VESA adapter allows you to conveniently mount your HP brand monitor to a

monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and

nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws

and dowels (not included).

www.3idee.eu

Page 1 VESA adapter Assembly instructions The VESA adapter is compatible with the following products from (hp.com): 22ea, 22eb, 22er, 22es, 22f, 23ea, 23eb, 23es, 23f, 24ea, 24eb, 24er, 24es, 24f, 25F, 27f, 27fw The VESA adapter allows you to conveniently mount your HP brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm).
Page 2 Assembly instructions Important Safeguards Please read these instructions carefully and keep them for future reference. If you pass the product on to third parties, these instructions should also always be given. Failure to follow these instructions may result in injury or damage to people and the product, for which we cannot accept any liability.
Page 3 For the disposal of this product we recommend to contact the responsible local authorities or disposal services. They can provide you with detailed information on available disposal options and recycling centers in your area. 4. Manufacturer Information 3idee Technologies S.à r.l. 5 Um Lenster Bierg L-6125 Junglinster Luxembourg 5.
Page 4 Assembly instructions Assembly instructions Step 1 Remove the base of your monitor if it is already attached. Step 2 Mount the adapter to the VESA connector of your monitor arm or directly to the wall. (Figure 1) Step 3 Push the monitor onto the adapter so that it audibly clicks into place. Note: Apply some pressure if necessary!