Problem
Snowthrower does not properly
clear the snow off the surface
20
Possible Causes
7. The auger/impeller drive belt is
worn or broken.
1. The skids and/or the scraper is
not properly adjusted.
2. The tire pressure is uneven.
3329-808 Rev A
Corrective Action
7. Replace the auger/impeller
drive belt; refer to
www.Toro.com for servicing
information or take the
snowthrower to an Authorized
Service Dealer.
1. Adjust the skids and the
scraper.
2. Check the pressure in the tires
and adjust the pressure if
necessary.