Supero SuperWorkstation 7045A-WT User Manual page 84

S W
uper orkstation 7045A-WT User's Manual
Global Activation Throttle
Select Enabled to enable the function of open-loop global thermal throttling on
the fully buffered (FBD) memory modules and allow global thermal throttling to
become active when the number of activate control exceeds a predefi ned number.
The options are Enabled and Disabled.
Force ITK Confi guration Clocking
Select Enabled to confi gure FBD clock settings to support ITK testing. The options
are Disabled and Enabled.
Reserved Branch for ITK Test
This feature allows the user to specify the memory branch number to be reserved
for ITK testing. The default setting is Branch 1.
Snoop Filter
Select Enabled to eliminate snoop traffi c to the graphics port to greatly improve
system performance when running graphics intensive applications. The options
are Enabled and Disabled.
Crystal Beach Features
Select Enabled to use the Intel I/O AT (Acceleration Technology) to accelerate
the performance of TOE devices. (Note: A TOE device is a specialized, dedicated
processor that is installed on an add-on card or a network card to handle some
or all packet processing of this add-on card. For this motherboard, the TOE
device is built inside the ESB 2 South Bridge chip.) The options are Enabled
and Disabled.
H. D. Audio Control
Select Enable to enable High-Defi nition Audio Control support. The options are
Disabled, Enabled, and Auto.
Route Port 80h Cycles to
This feature allows the user to decide which bus to send debug information to. The
options are Disabled, PCI and LPC.
Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This is a display that indicates the speed of the installed processor.
Frequency Ratio
(*Available if supported by the CPU.)
The feature allows the user to set the internal frequency multiplier for the CPU.
The options are: Default, x12, x13, x14, x15, x16, x17 and x18.
7-14