Supero SuperWorkstation 7045A-WT User Manual page 56

S W
uper orkstation 7045A-WT User's Manual
2
I C Bus to PCI-Exp. Slots
Jumpers JI 2 C3 and JI
connect the System Management Bus
2
(I C) to the PCI-E slots. The default set-
ting is Disabled. Both jumpers must be
set to the same setting See the table on
the right for jumper settings.
TPM
Jumper JPT1 allows you to enable TPM
(Trusted Platform Module) if a proces-
sors that supports TPM is used in the
system. The default setting is Enabled.
See the table on the right for jumper set-
tings. Note: You must enable TPM Sup-
port in the BIOS to use this feature.
2 C4 allow you to
5-24
I 2 C to PCI-E Slots
2
Jumper Settings (JI C3/JI
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
TPM Enable/Disable
Jumper Settings (JPT1)
Pin# Defi nition
1-2 Enabled
2-3 Disabled
2
C4)