Installing The Hinge Caps - Dell Precision 3541 Service Manual

5. Remove the display bezel.
About this task
The figure indicates the location of the hinge caps and provides a visual representation of the removal procedure.
Steps
1. Locate the hinge cap on the display back cover.
2. Remove the two (M2x2.5) screws that secure the hinge caps to the chassis.
3. Pinch the hinge caps to release the hinge caps from the ribs on the display back cover and then slide inwards to remove the hinge
caps from the display hinge.

Installing the hinge caps

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the hinge caps and provides a visual representation of the installation procedure.
Disassembly and reassembly 85