Solid-state drive
Removing the M.2 2230 solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
NOTE:
Before removing the base cover, ensure that there is no SD card installed in the SD card slot on your computer.
NOTE:
If you are replacing the M.2 2230 solid-state drive with an M.2 2280 solid-state drive, the following images indicate
how to remove the M.2 2230 solid-state drive from the M.2 2230 solid-state drive bracket.
The following image(s) indicate the location of the M.2 2230 solid-state drive and provides a visual representation of the
removal procedure.
24
Removing and installing components
Before working inside your
computer.