Toyota VELLFIRE 2010 Manual page 445

Machine Translated by Google
Note
ÿ After driving in a place where a lot of soot, oily smoke, dust, iron powder, chemical substances, etc. have
fallen ÿ When the vehicle is heavily soiled with dust
or mud ÿ When organic solvents such as benzene or gasoline adhere to the paintwork
•If the paint is damaged, repair it as soon as possible.
• When storing the wheel, remove dirt to prevent corrosion and store in a dry place.
please.
ÿ Cleaning the lamp
•Wash with care. Do not use organic solvents or hard brushes.
It may damage the lamp.
• Do not wax the lamp. Doing so may damage the
lens.
ÿ When using an automatic car wash (vehicles equipped with rain-sensing wipers)
Turn off the wiper switch.
In the AUTO mode, the wipers may operate unexpectedly and damage the wiper
blades.
ÿ When using a high pressure washer
•When washing the car, do not apply water directly to the cameraÿ or the area around it with
a high-pressure washer. High water pressure can cause shocks and equipment to
malfunction.
Do not touch the tip of the nozzle to the joints of the following parts, boots (rubber or resin covers),
Don't get too close to the connectors. High
water pressure can damage parts.
ÿ Drive
system parts ÿ
Steering parts ÿ
Suspension parts ÿ Brake parts
ÿ When raising the wiper arm
Hold the hook of the wiper arm and pull it
up. Pulling up
by holding only the wiper blade may deform
the blade.
ÿ: Equipment may or may not be available depending on the grade and options.
6-1. How to care
hook part
443
6How to care