Table of Contents
Advertisement
3.4.7
Power Management
Options Summary
Power Mode
Select power supply mode.
Restore on Power Loss
Select power state when power is re-applied after a power failure.
RTC wake system from S5
Enable or disable System wake on alarm event. When enabled, System will wake on the
hr::min::sec specified.
Chapter 3 – BIOS Setup
ATX Type
AT Type
Last State
Power On
Power Off
Disabled
Fixed Time
Dynamic Time
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
56
Advertisement
Table of Contents
