Table of Contents
Advertisement
3.4.3 Advanced: Power Management
Options summary:
Power Mode
Select power supply mode.
ACPI Sleep State
Select ACPI sleep state the system will enter when the SUSPEND button is pressed.
Restore on Power
Loss
Select power state when power is re-applied after a power failure.
Wake on LAN
Enable or disable integrated LAN to wake the system. (The wake On LAN cannot be
disabled if ME is on at Sx state.)
Resume on PCIE
Enable/Disable Resume from PCIE signal
Chapter 3 – AMI BIOS Setup
ATX Type
AT Type
Suspend Disabled
S3 only(Suspend to RAM) Optimal Default, Failsafe Default
Power Off
Power On
Last State
Enabled
Disabled
Disabled
Enabled
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
63
Advertisement
Table of Contents
