Table of Contents
Advertisement
12. Others
Flash
The flash is not activated.
• Is the flash closed? Open the flash.
• When the electronic shutter is used, the flash is not activated.
• When [Silent Mode] is set to [ON], the flash is not activated.
Monitor
The Monitor turns off although the camera is turned on.
• If no operations are performed during the set time period, [Auto Monitor Off]
and the Monitor turns off.
It may flicker for an instant or the brightness of the screen may change
significantly for an instant.
• This occurs due to the aperture of the lens changing when the shutter button is pressed
halfway, or when the brightness of the subject changes. This is not a malfunction.
Black, white, red, blue and green dots appear on the Monitor.
• This is not a malfunction.
These pixels do not affect the recorded pictures.
Noise appears on the monitor.
• In dark places, noise may appear to maintain the brightness of the monitor.
Playback
The picture is not played back.
There are no recorded pictures.
• Is the card inserted?
• Is this a folder or picture which was processed in the PC?
If it is, it cannot be played back by this unit.
> It is recommended to use the software "PHOTOfunSTUDIO"
PC to card.
• Has [Playback Mode] been set for playback?
> Change to [Normal Play].
Red part of the recorded image has changed colour to black.
• When Red-Eye Removal ([
> It is recommended to take a pictures with the flash closed, Flash Mode set to [‰], or
[Red-Eye Removal] set to [OFF].
(P158)
(P224)
] or [
]) is performed, red parts may be corrected to black.
(P194)
316
(P193)
(P204)
(P216)
(P290)
to write pictures from
is activated,
Advertisement
Table of Contents
