Table of Contents
Advertisement
5. 4K Photo and Drive Settings
4
Press the shutter button fully to start recording.
• The focus point changes automatically while recording.
When the icon ( B ) disappears, recording automatically
ends.
From the time you press the shutter button halfway until the end of recording:
• Maintain the same distance to the subject and the same composition.
• Do not operate the zoom.
• A motion picture in MP4 format will be recorded. (Audio will not be recorded.)
• When [Auto Review] is enabled, a screen that lets you select the desired focus area will
be displayed.
(P135)
To cancel [Post Focus]
∫
Select [OFF] in step
About camera temperature
• The camera stops operating for self-protection in the manner described below when
overheated due to, for example, high ambient temperature or recording using the Post
Focus function. Wait until the camera cools down.
– Continuous recording, motion picture recording, and the Wi-Fi connection will be
temporarily disabled.
– If you continue recording even when [
displayed and the camera will turn off automatically.
Limitations in [Post Focus]
∫
• Since recording is performed in the same image quality as 4K photos, certain limitations apply
to recording functions and menu settings. For details, refer to "The camera's setup for the 4K
Photo function" on P130.
• In addition to the limitations of the 4K Photo function, the following limitations apply to [Post
Focus] recording:
– Focus Mode is fixed to [AFS].
– Auto Focus Mode is disabled.
– Motion pictures cannot be recorded.
– [Digital Zoom] is disabled.
2
on P132.
] is flashing on the screen, a message will be
133
Advertisement
Table of Contents
