Advertisement
LENS HOOD (Ref. Figs. 1, 2, 3)
The hood ① can eliminate stray light that may affect the picture.
„ Using the lens hood (Ref. Fig. 2)
Align the hood attaching alignment mark ② of the hood with the hood release mark ⑤ of the lens.
Rotate the hood ① in the direction of the arrow until the hood locking mark ③ meets the hood release mark ⑤.
„ Stowing the lens hood (Ref. Fig. 3)
Attach the hood ① in reverse and rotate it until it locks.
• Be aware that the periphery of the photographed image may be darkened if the hood ① is not attached properly.
USAGE PRECAUTIONS
• An internal focusing (IF) system is employed to reduce the minimum focus distance. The angle of view may be wider than that of
lenses with other focusing systems when shooting at a distance less than infinity.
• The lens hood or the lens barrel may block the light from the flash. It is recommended to perform trial shooting in advance.
• Differences in the display systems of cameras may cause to show values different from the maximum and minimum aperture values
from the specifications. This is not an indication of an error.
• Do not touch the lens-camera interface contacts ⑬ with your fingers. Otherwise, it may cause a malfunction.
• If the temperature changes suddenly, condensation may form and cause malfunctions.
• The front lens is covered with stain-proof coating. After removing the dust on the lens surface with a blower or another means, wipe it
with a dry cloth.
• Never use benzene, thinner, or other organic solvents to clean the lens.
• Store the lens in a clean and well-ventilated place.
• For more details on the lens cleaning and storage, the compatibility with cameras, and other support information see our website.
https://www.tamron.com/global/consumer/support/
Disposal of Electrical and Electronic Equipment in Private Households. Disposal of used Electrical &
Electronic Equipment (Applicable in the European Union and other European countries with separate
collection systems)
This symbol indicates that this product shall not be treated as household waste.
Instead it shall be collected separately for the recycling of electrical and electronic equipment.
If the new products are purchased, this product might be handed over to the distributor or the collection system
of waste electrical and electronic equipment eventually.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of this product or components of this product.
If this product is disposed illegally, it might cause a possibility of penalties. For more detailed information about recycling of this product,
please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Advertisement
