18-400mm f/3.5-6.3 di ii vc hld for nikon, canon (3 pages)
Summary of Contents for Tamron B011
Page 1
Di III VC for E-Mount of Sony's NEX series mirrorless compact interchangeable-lens cameras (Model B011) Thank you for purchasing the Tamron lens as the latest addition to your photographic equipment. Before using your new lens, please read the contents of this Owner’s Manual thoroughly to familiarize yourself with your lens and the proper photographing techniques for creating the highest quality images possible.
Page 3
ATTACHING AND REMOVING THE LENS • How to mount the lens Removing the rear cap of the lens, align the lens attachment mark (11) on the lens barrel with its counterpart on the camera mount and insert the lens. Rotate the lens clockwise until it click-locks.
Page 4
• With the VC mechanism, there are occasions that the image in the viewfinder blurs right after the shutter button is pressed down halfway, but this is not a malfunction. • When the VC switch is turned ON, the number of images recordable is reduced due to the power used from the camera.
Page 5
(Fig. 5) and then rotate it clockwise to secure. The lens hood will be secure when the mark “TAMRON O” is at the top (Fig. 6). When attaching the lens hood, hold the focus and zoom control rings, so they are not rotated unintentionally.
Page 6
case, store it with commercially available drying agents such as silicagel, and change the agent occasionally. If you find mildew on your lens, consult an authorized repair shop or nearby photographic store. -Do not touch the lens-camera interface contacts since dust, dirt and/or stains may cause a contact failure between the lens and camera.