Advertisement
Thank you for purchasing this Tamron lens. Before using your new lens, please read the contents of this Owner's manual to properly
use the lens. Also, it will be important to read the manual of the camera to which you will attach the lens.
After reading, store this Owner's manual in a safe place.
Please read also the document "Precautions for Safe Use of Tamron Lenses" supplied with the lens for the detailed safety precautions
to observe when using Tamron lenses.
• Explains precautions that help to prevent problems.
• Explains things you should know in addition to basic operations.
PART NAMES (Refer to Fig. 1)
① Lens hood
③ Hood locking mark
⑤ Hood release mark
⑦ Focal length scale
⑨ Focus set button
⑪ Connector port
⑬ Lens-camera interface contacts
MAIN SPECIFICATIONS
Model
Focal Length
Maximum Aperture
Angle of View (diagonal)
Optical Construction
Minimum Object Distance (MOD)
Maximum Magnification Ratio
Filter Size
Length
Maximum Diameter
Weight
Lens Hood
Connector Type
• Length : From front end of the lens to mount surface.
• Specifications, appearance, functionality, etc., are subject to change without prior notice.
ATTACHING AND REMOVING THE LENS
Remove the rear cap of the lens. Align the lens attachment mark ⑫ and mounting mark on the camera, and then insert the lens.
Turn the lens clockwise until it locks.
To remove the lens, turn the lens in the opposite direction while pressing the lens release button on the camera.
• Turn off the power of the camera before attaching or removing the lens.
• For details, please read the instruction manual of your camera.
SWITCHING FOCUS MODE
Select the desired focus mode on the camera.
For manual focusing, turn the focus ring ⑥ to acquire the desired focus.
For details, please read the instruction manual of your camera.
• Under AF mode, there may be difficulty for autofocus to work depending on the subject.
FOCUS SET BUTTON (Ref. Fig. 1)
Press the focus set button ⑨ to use the function that has been assigned from the camera.
See the manual of the camera for more details.
CONNECTOR PORT (Ref. Fig. 1)
Lenses with the connector port ⑪ can be connected to a computer using the TAMRON connection cable (sold separately). Then, using
the dedicated "TAMRON Lens Utility
button ⑨.
See the online help of "TAMRON Lens Utility" using the link below for more details.
https://www.tamron.com/jp/consumer/support/help/lensutility/en/
• Do not use the TAMRON connection cable (sold separately) for any purpose other than connecting the TAMRON lens equipped
with a connector port to a computer.
• Tamron will not bear any responsibility for any loss or damage of data in use of the TAMRON connection cable (sold separately).
ZOOMING (Ref. Fig. 1)
Turn the zoom ring ⑩ to adjust the focal length (Zoom position) to a desired position.
ENGLISH
② Hood attaching alignment mark
④ Filter ring
⑥ Focus ring
⑧ Focal length mark
⑩ Zoom ring
⑫ Lens attachment mark
0.19 m (7.5") (Wide) / 0.3 m (11.8") (Tele)
" application, you will be able to update the firmware and register functions to the focus set
TM
A068
17 - 50 mm
F/4
103°41' - 46°48'
13/15
1:4.6 (Wide MOD) / 1:3.8 (Tele MOD)
ø 67 mm
114.4 mm (4.5")
ø 74.8 mm
460 g (16.2 oz)
HA062
USB Type-C
Advertisement
