Table of Contents
Advertisement
NOTE: RS232 remains enabled, whether Ethernet is enabled or dis-
abled.
This monitor comes with networking capability which lets you remotely access and
change settings such as Input Source Selection, Brightness and Volume.
To access the Dell Display Web Management tool you need to set the IP Addresses
for your computer and the monitor.
1. Press the Menu key on the remote control to display the IP Address of the
monitor, or by navigating to OSD Menu > Others. By default, the IP Address is
10.0.50.100
2. In the computer's IP Properties tab, specify an IP Address by selecting Use the
following IP Address and enter the following values: For IP Address: 10.0.50.101
and for Subnet Mask: 255.255.0.0 (leave all other entries as blanks).
44
Operating the monitor
|
Dell 55 Monitor
Brightness/Contrast
Display Info
Auto Adjust
DDC/CI
Input Source
HDMI CEC
Color
LCD Conditioning
Display
Firmware
Audio
IP Address
Menu
Service Tag
Reset Others
Personalize
Factory Reset
Others
On
Off
Off
00X000
10.0.50.100
ABCDEFG
Advertisement
Table of Contents
