Table of Contents
Advertisement
The cooking time can be set in one-minute incre-
ments up to one hour, and then in five-minute incre-
ments.
Touch
.
3.
a After a few seconds, the appliance starts heating
and the cooking time counts down.
a When the cooking time has elapsed, a signal
sounds and the duration is at zero on the display.
Once the cooking time has elapsed:
4.
Press any button to end the signal prematurely.
‒
To set another cooking time, press the
‒
When your food is ready, switch off the appli-
‒
ance.
Changing the cooking time
You can change the cooking time at any time.
is highlighted on the display.
Requirement:
Change the cooking time using the
▶
a The appliance applies the change after a few
seconds.
Cancelling the cooking time
You can cancel the cooking time at any time.
is highlighted on the display.
Requirement:
Reset the cooking time to zero using the
▶
a After a few seconds, the appliance applies the
change and continues to heat without a cooking
time.
9.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ The end time cannot be set for types of heating with
grill function.
¡ In order to achieve a good cooking result, do not
delay the end time once the appliance is already in
operation.
¡ Food will spoil if you leave it in the cooking com-
partment too long.
Requirements
¡ The type of heating and temperature or setting are
set.
¡ A cooking time must be set.
Press the
button repeatedly until
1.
in the display.
Press the
or
button.
2.
a The display shows the calculated end time.
Use the
or
button to delay the end time.
3.
Touch
.
4.
Programme
10 Programme
The programmes help you to use your appliance to
P
e
r
-
m
m
a
r
g
o
prepare different dishes by selecting the optimum set-
tings automatically.
10.1 Cookware for programmes
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C.
a After a few seconds, the appliance applies the set-
a Once the calculated start time is reached, the appli-
a When the cooking time has elapsed, a signal
5.
button.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
Requirement:
or
button.
▶
a The appliance applies the change after a few
Cancelling the end time
You can delete the set end at any time.
Requirement:
button.
▶
a After a few seconds, the appliance applies the
9.5 Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
1.
2.
a The time that is set appears in the display.
Tip: You can go to the basic settings → Page 14 to
specify whether or not the time should be shown on
the display.
Changing the time on the clock
You can change the time on the clock at any time.
Requirement: The appliance must be switched off.
is highlighted
1.
2.
a The appliance applies the change after a few
Glass or glass ceramic cookware is best. The joint
should cover approx. two thirds of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
ting and the display shows the set end time.
ance starts heating up and the cooking time counts
down.
sounds and the duration is at zero on the display.
Once the cooking time has elapsed:
Press any button to end the signal prematurely.
‒
To set another cooking time, press the
‒
When your food is ready, switch off the appli-
‒
ance.
is highlighted on the display.
Use the
or
button to delay the end time.
seconds.
is highlighted on the display.
Reset the end time to the current time plus the set
cooking time using the
change and starts heating up. The cooking time
counts down.
Use the
or
button to set the time.
Press the
button.
Press the
button repeatedly until
in the display.
Use
or
to change the time.
seconds.
Programme en
button.
button.
is highlighted
11
Advertisement
Table of Contents
