Table of Contents
Advertisement
DETAILED CHANNEL SETTINGS
20
Confirm »Satellite Selection« by pressing
»
«, and press »
satellite you want to scan.
21
Select »Scan Mode« with »
select »Full« or »Network« with »
22
Select »Scan Type« with »
<
>
Press »
«, »
« to select »Free Channels
Only« for free channels only, »Encrypted
Channels Only« for encrypted channels or
»All« for all satellite channels.
23
Using »
« or »
V
Λ
<
>
Press »
«, »
« to select "All" to search for
both "Digital Channels Only" for TV chan-
nels only and "Radio Channels Only" for
radio channels only.
24
Use »
« or »
« to select »LNB Settings«
V
Λ
and confirm with »
25
Using »
« or »
V
Λ
confirm with »
«.
Press »
« or »
V
Λ
responding to the satellite you want to scan
and confirm with »
26
Press »
« twice to return to »Automatic
a
Channel Scan«.
Note:
Make the settings described in steps 15
7
to26 for each satellite you want to scan.
27
Select »Next« with »
»
« to confirm.
– » Automatic Scan« menu shall be dis-
played and the scan for TV stations will
start.
– S canning may take several minutes
depending on the number of television
stations received.
« or »
« to select the
V
Λ
« or »
« and
V
Λ
<
>
«, »
« or »
«.
V
Λ
« select »Store Type«.
«.
« select »Location« and
« to select the location cor-
«.
« or »
« and press
V
Λ
----------------------------------------------------
Notes:
Use set-up equipment supported/suggested
7
by your SCR Switch.
Other users / receivers connected to the
7
«.
system may be affected if the specified user
band number and frequency are changed
during installation.
User band and User band frequency are
7
specified on the SCR switch used; and each
user / receiver must select a specified user
band and user band frequency.
With SCR satellite system, auto scan by
7
several users / receivers at the same time
may cause problems.
28
Press »
a
H
press »
T
press »
« to return to the previous menu,
« to return to TV broadcast or
« to return to Home menu.
ENGLISH
99
Advertisement
Table of Contents
