Table of Contents
Advertisement
Quick Links
SUMAKE
Specification:
Blow Per Min
Stroke Length
Air Consumption
Overall Length
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
Air File W/4 Files
ST-6608
7,500 b.p.m.
8 mm
8.5 CFM (240 L/min)
7" (180 mm)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
0.8 lbs (0.36 kg)
Noise and Vibration:
Vibration
EN ISO 28927-8
Sound Pressure Level
No load: 83 dB(A)
Load:
12.2 m/s²
Sound power level
No load: 94 dB(A)
Uncertainty
²
K= 1.5 m/s
Noise
Remark
EN ISO 15744
Please always
wear ear
protector at
environment
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
hearing!
K= 3dB
ST-6608-S-1801A-CFF
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sumake ST-6608
Summary of Contents for Sumake ST-6608
- Page 1 3/8” (10 mm) dB(A) due to risk of impaired Uncertainty Uncertainty Air Pressure 90 psi (6.3 bar) hearing! ² K= 1.5 m/s K= 3dB Net Weight 0.8 lbs (0.36 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-6608-S-1801A-CFF...
- Page 2 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： AIR FILE W/4 FILES Model/ Serial No.：ST-6608 to which this declaration applies, complies with these normative documents: ...
- Page 3 The TOOL HOLDER will take 5 mm diameter shank files and small diamond files or regular small files in 3mm Shank diameter. The patented “UNIVERSAL SWIVEL AIR INLET JOINT” with speed regulator is equipped for better maneuverability and speed control of the tool. ST-6608-I-1711A-CF...
- Page 4 ST-6608 AIR FILE W/4 FILES PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 6608-01A Head 6608-17 Gasket 6608-02 Front cap bolt 6608-18 Regulator valve case 6608-03 Set Bolt 6608-19 Rear cap bolt 6608-04 Attachment for saw 6608-20 Spring Pin...
- Page 5 CUTTER(SAW) Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture whilst maintaining secure footing and avoiding awkward or off-balanced postures. The operator should change posture during extended tasks which may help avoid discomfort and fatigue. 3.
- Page 8 the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary.
Need help?
Do you have a question about the ST-6608 and is the answer not in the manual?
Questions and answers