Safety Instructions - Dometic CFF12 Short Operating Manual

Safety instructions

Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product
manual in order to ensure that you install, use, and maintain the product properly at all times. These instructions
MUST stay with this product.
By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and
that you understand and agree to abide by the terms and conditions as set forth herein. You agree to use this prod-
uct only for the intended purpose and application and in accordance with the instructions, guidelines, and warn-
ings as set forth in this product manual as well as in accordance with all applicable laws and regulations. A failure to
read and follow the instructions and warnings set forth herein may result in an injury to yourself and others, damage
to your product or damage to other property in the vicinity. This product manual, including the instructions, guide-
lines, and warnings, and related documentation, may be subject to changes and updates. For up-to-date product
information, please visit dometic.com.
Find the full operating manual online on
documents.dometic.com/
?object_id=73034
Further product information can be accessed via QR code on the energy label on the product or via
eprel.ec.europa.eu.
!
WARNING!
Also observe the safety instructions on page 3 to page 4.
1 Safety instructions
D
DANGER! Failure to obey these warnings will result in death or serious injury.
Electrocution hazard
• On boats: If the device is powered by the mains, ensure that the power supply has a
residual current circuit breaker (RCCB) or a ground fault circuit interrupter (GFCI).
Installation, especially in potentially damp areas, must be in accordance with all appli-
cable installation regulations.
• Do not touch exposed cables with your bare hands. This applies especially when
operating the device from the AC mains.
• Before starting the device, ensure that the power supply line and the plug are dry.
!
WARNING! Failure to obey these warnings could result in death or serious
injury.
Electrocution hazard
• Do not operate the cooling device if it is visibly damaged.
• If the cooling device's power cable is damaged, it must be replaced with a suitable
power cable or assembly available from the manufacturer or its service agent to pre-
vent safety hazard.
• This cooling device may only be repaired by qualified personnel. Improper repairs
can lead to considerable hazards.
16
CFF12, CFF18, CFF20, CFF35, CFF45, CFF70DZ
EN