Related Manuals for Feider Machines FM1125
Summary of Contents for Feider Machines FM1125
- Page 1 ORIGINAL INSTRUCTIONS INSTRUCTION MANUAL ANGLE GRINDER FM1125 READ THIS INSTRUCTIONS MANUAL BEFORE USE THE TOOL BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux - France...
-
Page 2: Table Of Contents
CONTENTS 1. SAFETY WARNINGS 2. SYMBOLS 3. THE PRODUCT 4. USE 5. MAINTENANCE AND SERVICNG 6.DISPOSAL 6. CE DECLARATION 7. WA R R A N T Y 8.PRODUCT FAILURE 9. WARRANTY EXCLUSIONS... -
Page 3: Safety Warnings
1. SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 4 those intended could result in a hazardous situation. 5) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained . Safety instructions for all operations Safety Warnings Common for Grinding, Sanding, Wire Brushing, Polishing or Abrasive Cutting-Off Operations: a) This power tool is intended to function as a grinder.
-
Page 5: Symbols
Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below. a) Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. -
Page 6: The Product
5. Carbon brushes 2. Handle assembly 6. Auxiliary handle 3. ON/OFF switch 7. Guard 4. Supply cord 8. Wrench 2) Technical data Model FM1125 Voltage 230-240V˜ 50Hz Power 1100W Rated speed in revolution per minute 12000/min Disc diameter in mm Ø125mm... -
Page 7: Use
Warning The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used; and It is necessary to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). - Page 8 Installation of the auxiliary handle The auxiliary handle can be installed on both sides of the tool. The place where to install the auxiliary handle will depend of the position where you will use the tool. Install and screw firmly the handle until it locks in place. See the operation part for install the handle according the position of tool.
-
Page 9: Maintenance And Servicng
5. MAINTENANCE AND SERVICE Keep your tool on a regular basis. This will keep your tool in good working order and extend its lifespan. Do not use abrasive or corrosive agents to clean the tool. These types of products damage your tool. Do not make any repairs by yourself. -
Page 10: Ce Declaration
BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux - France Declare that the following tool: ANGLE GRINDER FM1125 Serial number: 20210432672-20210433171 Is in conformity with the requirements of the Directive Machine 2006/42/EC and to the followings Europeans Directives:... -
Page 11: Warranty
8. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 12: Product Failure
9. P R O D U C T FA I L U R E WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 13: Warranty Exclusions
10. WA R R A N T Y E X C L U S I O N S THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. •...