Duramaxx 10022298 Manual page 20

Hopper adjustment
When the feeding of notes is faulty, adjust
the position of the feeder of notes rotating
the wheel located in the later part of the
machine, to assure appropriate feeding.
Rotate toward the left to increase the
thickness.
Rotate toward the right to diminish the
thickness.
When the problem is not solved with
the adjustment of the wheel, the rubber
tongue should be replaced.
Retire the screws that hold the later cover.
Retire the plate of the feeding deposit that
extends down.
Disconnect the connector of the sensor.
Press both badges, conquering the force
of the spring and remove the rubber
language held by these. Later to replace
the rubber tongue for a new one, repeat
the adjustment action returning her to the
original places.
20