Duramaxx 10022298 Manual page 17

and stop when the counted quantity reaches the preset batch one.
To repeat the batch counting operation under the same preset batch quantity, just remove
the counted bill from the stacker. The next group of bills will continue under the same
settings.
If you wish to keep batching without removing the preset number, press the START button.
If the counted number does not reach the preset batch number, the counter display will
show the quantity with a blinking number.
When counting with MG and/or UV detection on, the machine will stop automatically when
detecting counterfeit currency. This function can be resumed by removing the dubious bill
form the stacker and pressing the START button.
UV (ultraviolet) detection function
This function is to check all kinds of banknotes which contain UV features. The UV func-
tion is automatically turned on by default when the machine is powered up. It can also be
selected and deselected by pressing CF and the UV button located in the function console.
If the machine detects a counterfeit note when counting, it will stop and emit a beeping
sound, while the batch display will show the message "UU" and the UV indicator will blink
(alerting the user of the presence of a dubious bill). The dubious bill will always be the last
one on the stacker. Remove the dubious bill, press "START" button to continue.
The sensitivity of UV detection can be adjusted. Press "UV" button for 3 seconds, the batch
display will show the current sensitivity level "UU -- 5", then press number key button to
choose the desired sensitivity level (range from 0-9). After choosing of the level, press
"START" button to confirm.
MG (Magnetic) detection function
The MG function is automatically turned on by default when the machine is pow-
ered up. lt can also be selected or deselected by pressing the MG button located in
the function console.
If the machine detects a counterfeit note when counting, it will stop and emit beeping
sound, while the batch display will show the message "nng" and the MG indicator will blink
(alerting the user the ofthe presence of a dubious bill). The dubious bill will always be the
last one on the stacker. Remove the dubious bill, press "START" button to continue.
The sensitivity of MG detection can be adjusted. Press the ADD button for 3 seconds, the
batch display will show the current MG sensitivity level "nng--5", then press number key
to choose the desired sensitivity level (range from 0-9). After choosing of the level, press"
START" button to confirm.
Double Detection function (UV and MG)
The UV and MG detection can be used atthe same time while counting to multiple the
chances of detecting a counterfeit bill. By default, the UV and MG detection functions are
automatically turned on when the unit is powered up. Those functions can also be selected
or deselected by pressing both "UV" and "MG" buttons.
IR (Infrarad) Detection Function
This function is used to check a double-note.
By default, serving as a supplementary function, the IR detection can be activated when
17