Operation - Duramaxx 10022298 Manual

Power up
Connect the power cord to the machine (power outlet), then plug it to a power
source and switch the unit on. The unit will conduct a self-check by spanning the
feeding roller while the MG and/or UV functions will be automatically turn on by
default. The counting display will show "0" when the unit is ready. The machine is
in its normal working condition.
Counting function
Once the bills are correctly placed in the hopper, the machine will start counting
automatically. The number counted bills will be shown on the counting display.
Moreover, once the bills are removed from the stacker, the counting display will be
clear and the batch display in turn will show the number of counted bills instead.
Bills should be correctly placed as indicated in the following steps:
Place the bills between the counting guides as shown in the picture.
The counting mode can be changed between automatic and manual. Press the CF
key then press AUTO to choose automatic counting or manual counting.
Addition function
Addition can be performed by pressing the CF and ADD button (when the ADD in-
dicator is on). In this case, removing the counted bills from the stack will not clear
the quantity counted and shown on the counting display. The next bills placed in
the hopper will be counted and added to the preceding quantity.
Batch function
The preset batch function can be performed by pressing the BATCH button (when the
batch indicator is on). By default, when pressing the BATCH button, the batch number is
set to 100. By pressing it again, the batch number can be changed to 50 the first time
and to 20 the second time. The batch number can be set in amounts between 1 to 999. To
clear this function, press the BATCH button until the indicator is off.
Under the batch counting mode, once the hopper is loaded, the machine will start counting
16

Operation