Duramaxx 10022298 Manual page 18

the unit is powered up.
If the machine detects a double-note when counting, it will stop and emit beeping sound,
while the batch display will show the message "DBL" (alerting the user the presence of
a double-note). The double-note will always be the last one on the stacker. Remove the
dubious bill, press "START" button to continue.
The sensitivity of IR detection can be adjusted. Press "IR" button for 3 seconds, the batch
display will show the curvent sentiuity level "DBL-5", then press the number key to choose
the desired value (range from 0-9). After choosing of the level, press
"START"button to confirm.
Size Detection
This function is used to check the note of size problem.
By default, serving as a supplementary function, the size detection can be activated when
the unit is powered up. If the machine detects a note with size problem, it will stop and
emit beeping sound, while the batch display will show the message "dd"
(alerting the user the of the presence of a note with size problem). The note with size
problem will always be the last one on the stacker. Remove the dubious bill, press "START"
button to continue.
The sensitivity of size detection can be adjusted. Press "DD" button for 3 seconds, the batch
display will show "DD--5", then press the number key to choose the desired value,after
choose the level ,press"START"button to countion.
Note: The size detection is subject to the size of USD, only the note which is
smaller than that can be detected.
Half-note Detection
This function is used to check the note of size problem.
By default, serving as a supplementary function, the HALF-note detection can be activated
when the unit is powered up.
If the machine detects a half-note, it will stop and emit beeping sound, the batch display
will show the message " HALF" (alerting theuser the ofthe presence of a doubled bill).
The dubious bill will always be the last one on the stacker. Remove the dubious bill, press
"START" button to continue (the counter display will clear).
18