Warning Messages - Duramaxx 10022298 Manual

The batch display may shows soma error massage when counting, which means there are
soma problems with the machine. Refer to the following diagram to find way to solve it.
Message Error Description
UU Suspicious bill detected by UV
system;
Problem in the UV system.
nng Suspicious bill detected by MG
system;
Problem in the MG system.
dbl Double-note detected by IR
system;
Problem in the IR system.
dd Note of size problem detected
by size
detection system;
Problem in the size detection
system
HALF Half-note detected by half-note
detection system;
Problem in the half-note detec-
tion system.
CHN Chain note
ER0 Problem with the left counting
sensor.
EA1 Problem with the right counting
sensor
EA2 Problem
sensor
EA3 Problem with the speed sensor
Generally speaking, most of the above-mentioned problems may be caused by dust or dirt
inside the machine. So keeping the machine clean is highly recommended.

Warning Messages

with the receiving
Required Actions
Remove the suspicious bill from the stacker,
press "START" to continue;
Lower the UV sensitivity.
Remove the suspicious bill from the stacker,
press "START" to continue;
Lower the MG sensitivity.
Remove the suspicious bill from the stacker,
press "START" to continue;
Lower the IR sensitivity.
Remove the suspicious bill from the stacker,
press "START" to continue;
Lower the size checking sensitivity.
Remove the suspicious bill from the stacker,
press "START" to continue.
Remove the bill from the stacker, press
"START" to continue.
Clean the sensor or replace it.
Clean the sensor or replace it.
Clean the sensor or replace it.
Clean the sensor or replace it
19