Subaru Impreza 2017 Service Bulletin page 4

d. If the "Manual" setting is selected for clock adjustment, the settings to the Multi-Function
Display (MFD) in the combination meter are made using the i/Set and +/- buttons on the
steering wheel. Models with a color Multi-Function Display (MFD) in the center of the
dash use the i/Set button on the steering wheel and the up / down buttons located on the
MFD.
i. If vehicle is equipped with a color
MFD, press the i/Set button until
the MFD displays the "Hold SET
button" screen. Hold the i/Set
steering wheel button to enter the
settings menu. The date and time
settings are accessible from this
menu.
3) the concern is for other clock issues, please complete a fresh Harman Investigation Guide
Questionnaire documenting the customer's concern and the results of each diagnostic step in
this bulletin. If possible, capture a video of the condition then contact the SOA Techline to
review for next steps. Techline will request you send the completed questionnaire, step by
step bulletin results and any videos of the condition.
WARRANTY / CLAIM INFORMATION:
For vehicles within the Basic New Car Limited Warranty period or covered by an active Subaru
Added Security Gold plan, this repair may be submitted using the following claim information:
Labor Description
HARMAN CLOCK TROUBLESHOOTING
IMPORTANT REMINDERS:
• SOA strongly discourages the printing and/or local storage of service information as
previously released information and electronic publications may be updated at any time.
• Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
• Always refer to STIS for the latest service information before performing any repairs.
Bulletin Number: 15-229-18R; Revised: 11/15/19
Labor Operation # Labor Time
A849-025 0.5
Fail Code H/U Type
TAQ-43 Base, Mid & High
Page 4 of 4