2. iPhone:
iii. After these items are enabled, disconnect the device from the head unit then
reconnect. (See example screenshot of head unit display below.)
iv. Confirm both the Phonebook and Messages buttons on the display are highlighted
(activated) as shown below.
Bulletin Number: 15-229-18R; Revised: 11/15/19
After pairing, access must be enabled on the
phone. To do this, go to Settings > Bluetooth >
Select the paired head unit labeled "Subaru
BT" and make sure both Sync Contacts and
Show Notifications are enabled. (See
screenshot to the right.)
Continued...
Page 3 of 4