LEADING EDGE SAFETY TRIREX AB-O2 Instruction Manual page 26

E
N
G
PROBLEM
Locking Mechanism (7) stuck and will not release.
L
I
POSSIBLE CAUSE
Locking Mechanism (7) is jammed against the Rake (FIG A-3) portion of the Engagement Arm Assembly (6).
S
H
SOLUTION
Hoist or lift the TriRex off the walking surface to allow extended movement of the Engagement Arm Assembly (6).
Press downward on the Engagement Arm Assembly (6) until the Locking Mechanism (7) is able to clear the Rake
and return to is proper resting position. (FIG A-3-1)
FIG A-3-1
PROBLEM
TriRex does not roll easily or bounces when traveling due to flat spots on tires.
POSSIBLE CAUSE
Leaving the unit stationary in one location for too long a period of time.
SOLUTION
Rotate the tires or block the axles off the ground during long-term storage. Replace tires if flat spots prevent the
unit from being moved easily.
T R ™ I
RI EX
APPENDIX A—TROUBLESHOOTING
7
6
M
NSTRUCTION
FIG A-3
6
7
25
ANUAL