Table of Contents
Advertisement
Adding Z-Wave Devices (via mobile app)
Alternatively, your Platinum 1050 allows you to
add Z-Wave devices using the AS Air Home app
on your mobile device.
Adding Z-Wave Devices
1. Start the mobile app.
2. Select the menu button in the top left corner.
3. At the bottom of this slide out menu, select
Connect New Device.
page 28
4. Select Z-Wave Device.
5. When prompted, prepare the device to be
added to the Z-Wave network by following
the device manufacturer's instructions to
put device into add mode. You will have
four minutes to complete this process.
Platinum 1050 User Guide
Advertisement
Table of Contents
