Preset Creation: A Summary - Studiologic VMK-88 Plus Owner's Manual

VMK88-MANUAL_________________
PRESET CREATION SUMMARY

Preset Creation: A Summary

Preset creation is an easy process involving the use of the program controls shown in the
KEYBOARD LAYOUT section of this manual. You start by choosing a preset number using
the DE dial and hitting the ENTER button. Choose a preset number higher than 3 so as not to
overwrite the software presets. You can either choose an unused number or overwrite a
previously written preset.
Once the preset number is selected, you hit the EDIT button to start assigning tasks to
whichever controls you select. The LCD panel will tell you to Press or Move Any Controls.
You may move or press a knob, a slider, a button, a keyboard key or a pedal. The LCD will
tell you what you are programming once you have moved or pressed it.
Now, you will use the Page Up or Down buttons to view the parameters available for
assignment. Use the DE dial to select the parameter value you want. When the value is
selected, use the Page Up or Down buttons to move to the next parameter. When all
parameters for the control have been defined, you will hit the STORAGE button and the LCD
will ask if you want to store the parameters you have selected – either NO or YES. Use the
buttons underneath YES or NO to make your choice.
If you need to program additional controls for the preset, hit the EDIT button and once again
you will be asked to Press or Move Any Controls. Repeat the procedure above for all the
controls you desire to program for the preset you are creating.
When all the controls have been assigned to the tasks you want them to accomplish, you
will have hit the STORAGE button and selected YES following the programming of the last
control. The LCD screen will display a blinking cursor following Preset Num. At this time,
you may name your preset (see the Preset Naming section on page 7) or decide to use only
the number of the preset (4 – 30). If the number is enough, hit STORAGE again and the LCD
will ask "Are You Sure?" Press the button under YES and the controller will return you to
the Preset page with your preset number.
If you decide to name the preset, follow the procedure in the Preset Naming section on page
7. The last step is hitting the STORAGE button at which time the LCD will ask, "Are You
Sure?" Press the button under YES and the controller will return you to the Preset page
with your preset name and number.
It is essential that you remember that YOU MUST PRESS THE STORAGE BUTTON TWICE TO
SAVE YOUR PRESET SETTINGS! The first time you will be asked if you want to "Store
Parameters." The all-important second time, the LCD will ask, "Are You Sure?" When you
hit the YES button that time, your preset is saved.
The following Procedures will help familiarize you with the programming flexibility of the
VMK-88. They will show you the steps involved in assigning parameter values to the
programmable controls of the keyboard. The procedures will show the ease with which
you can create presets to control both studio and performance software.
________________________________________6________________________________________