To connect the wireless LAN to your home network
To connect using the WPS button
To connect using SSID and KEY number
FTXTA30C2V1B(W)(B)
Daikin room air conditioner
4P518786-11K – 2023.05
...lamp is blinking.
Timer
Operation and timer
4 Press
to exit the menu.
Result: The display will return to the default screen.
The wireless adapter can be connected to your home network using the:
▪
WPS button (Wi-Fi Protected Setup) on the router (if present),
▪
The SSID (Service Set Identifier) and the KEY (password) - located on the unit.
1 Hold
for at least 5 seconds in the default screen.
Result: The confirmation display (menu ) appears.
2 Press repeatedly
3 Press
to confirm the selection.
Result: "Beep" sound is heard when the unit receives signal.
4 Press the WPS button on your communication device (e.g. router) within
approximately 1 minute. Refer to the manual of your communication device.
INFORMATION
If the connection with your router is not possible, try procedure
SSID and KEY
number" [
5 Press
to exit the menu.
Result: The display will return to the default screen.
1 Hold
for at least 5 seconds in the default screen.
Result: The confirmation display (menu ) appears.
2 Press repeatedly
3 Press
to confirm the selection.
Result: "Beep" sound is heard when the unit receives signal.
4 Connect your smart device to the access point in the same way as to a
standard wireless network.
Status
Communication is OK
Communication is OFF
or
until the WPS setting display (menu ) appears.
4
39].
or
until the AP mode display (menu ) appears.
5
Operation
|
"To connect using
User reference guide
39