Advertisement
OPERATION OF CONTROLS
A= Filtering system / Set clock
B= Delay Timer
C= Speed S1/ "-" adjust / off
D= Digital display
E= Speed S1/ "+" adjust / off
F= Alarm
G= Light
When the Key A is flashing, at the same time "
digital display, it reminds the user to clean the filters. After the filter
has been cleaned assemble back. Press key A till the light is off and
the unit is back to setting function again.
When pressing key A for 3 seconds, the clock "
digital display will flash, press key A to switch the mode function
to set hours and minutes, and then press key C or E to set the
correct time. The Clock's system is 24 hours.
Normal Mode Operation
1. Press 'C' to turn ON at speed 1 / Adjust speed / turn OFF
2. Press 'E' to turn ON at Speed 3 / Adjust speed / turn OFF
3. Pressing 'E' twice operates the appliance at 'Turbo Speed'
Timer Mode Operation
1. Press 'B' to turn OFF the machine after a preset time of 15min
2. Press 'B' again to set the turn OFF time in hours
3. Press 'C' / 'E' to change the preset time when the time is
blinking
10
"is flashing on the
"on the
Advertisement
