Panasonic PT-L502 Operating Instructions Manual page 16

(3) When using an existing access point for
wireless communication
Use the access point to carry out wireless communication between the
computer and the projector in Infrastructure mode. Some access points
may not let you make connections.
Computer
Computer
Setting procedure
Set the computer and the projector according to the following procedure.
Preparation &
settings
<Projector>
Inserting the
wireless card (page
18)
LAN settings (page
21)
Setting example
Setting item
IP ADDRESS
SUBNET MASK
MODE
CHANNEL
SSID
Note:
• If either the projector or computer is out of the range of the access point,
use Ad Hoc mode as described in page 14.
Computer
Access point
Check communication
<Computer>
Use Wireless
Manager to check
communication with
the projector (page
40)
Projector LAN settings
Ask your network administrator for details on
settings.
INFRASTRUCURE
Set to the same CHANNEL as the CHANNEL for the
access point. (Ask your network administrator for
details.)
Set to the same SSID as the SSID for the access
point. (Ask your network administrator for details.)
-16-
Computer
LAN
Projector
Transmit
images
<Computer>
Use Wireless
Manager to
transmit the
images (page
41)