Stealth Cam STC-IR1 User Manual page 37

The Stealth Cam locking plate is an accessory designed to aid the user
in securing the camera to its mounting area. The lock plate is intended
to be used with a padlock, chain and / or cable.
Step 1 Mount the Camera. Mount the camera using either the supplied
strap or the accessory tree screw.
Step 2 Insert the Lock Plate.
When Using the Strap: Insert the lock plate between the strap
& back camera housing through the strap slots. When Using
the Tree Screw: Insert the lock plate through the strap slots.
Step 3 Install Cable or Chain. Insert the cable or chain through one
hole of the lock plate. Wrap the chain or cable around the front
of the camera housing being sure not to obstruct the camera
lens, flash or PIR sensor. Then insert the chain or cable through
the second hole on the lock plate. Tighten the cable or chain
snug around the camera & mounting surface. Using a pad lock
secure the chain or cable behind the mounting surface.
Precautions:
The Stealth Cam lock plate is meant to be used in coordination with a
www.stealthcam.net
STC-IR1
Toll Free 877-269-8490
37